Nautilus T916 Owner's And Assembly Manual Addendum page 9

Step 6. Final Adjustment
(Figures 10, 11, and 12)
6-1 Make sure the covers are positioned
properly before tightening all the screws.
All gaps should be even and all edges
should be aligned;
Note: some screws may have to be
loosened and then re-tightened to ensure
the best possible fit.
6-2 Secure all plastic caps by pressing
down until the cap snaps closed;
6-3 Complete Step 6 as shown in the
printed Assembly Manual.
Warning: make sure all fasteners are
secure before moving on.
assembly questions? call 800-235-2233 for help. 9
Figure 10
Figure 11
Figure 12