Nautilus T916 Owner's And Assembly Manual Addendum page 6

Step 1. Install Side Brackets
(Figures 1, 2 and 3)
1-1 Place the (16) plastic caps on (16)
10-32 x 3/4 screws;
1-2 Secure (2) side brackets to the LH side
cover using (2) screws with plastic caps;
1-3 Secure (2) side brackets to the RH side
cover using (2) screws with plastic caps;
1-4 Secure (2) side brackets to the top
cover using (2) screws with plastic caps.
Note: make sure the end of the bracket with
the hole closest to the edge is towards the
cover.
Note: do not tighten any screws at this time.
The screws should be loose enough for the
brackets to pivot freely.
assembly questions? call 800-235-2233 for help. 6
Figure 1
Figure 2
Figure 3