Nautilus T916 Owner's And Assembly Manual Addendum page 8

Step 4. Install Top Bracket
(Figure 7)
4-1 Secure the top bracket to the LH and
RH side covers using (2) screws with
plastic caps.
Note: do not tighten any screws at this time.
Step 5. Install Top Cover
(Figures 8 and 9)
5-1 Place the top cover into position and
align the holes with the top bracket;
5-2 Secure the top cover to the top bracket
using (2) screws with plastic caps;
5-3 Align the hole in the rear of the LH side
cover with the bracket attached to the
top cover and secure using (1) screw
with plastic cap;
5-4 Align the hole in the rear of the RH side
cover with the bracket attached to the
top cover and secure using (1) screw
with plastic cap;
5-5 Secure the top cover to the kick plate
using (2) 10-32 x 1/2 screws;
5-6 Secure the LH side cover along the
inside of the upright using (2) 10-32 x
1/2 screws;
5-7 Secure the RH side cover along the
inside of the upright using (2) 10-32 x
1/2 screws.
Note: do not tighten any screws at this time.
assembly questions? call 800-235-2233 for help. 8
Figure 7
Figure 8
Figure 9