ENFORCER VC-1BAQ User Manual

SECO-LARM BNC TO VGA CONVERTER

Troubleshooting:

VGA device does not function correctly
Power LED indicator not lit
Also Available from SECO-LARM:
Passive VGA Balun Passive Video Balun
EVT-SBP-GQ
The fast, easy way to connect a
Low-cost way to transmit VGA
CCTV camera to a monitor,
signals up to 450' @ 640 x 480
multiplexer, or video recorder.
resolution.
WARRANTY This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM's obligation is
limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect,
repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines
that such equipment is not operating properly as a result of causes other than defects in material and workmanship.
The sole obligation of SECO-LARM, and the purchaser's exclusive remedy, shall be limited to replacement or repair only,
at SECO-LARM's option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential
personal or property damages of any kind to the purchaser or anyone else.
NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the
SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right
to change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2011 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in
whole or in part, without the written permission of SECO-LARM.
SECO-LARM U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326
4
• Make sure the power, input and output cables
are firmly connected to the converter.
• Make sure the video input device is turned on.
• Make sure the video output device is turned on.
• Test the coaxial cable between the video source
and the converter to make sure it is functional.
• Test the VGA cable between the video monitor
and the converter to make sure it is functional.
• Make sure the monitor being used can support
720 x 480 resolution
• Make sure power is connected to the converter
Video Distributor
1 Input, 2 outputs
EVT-PB1Q VA-1102B-WQ
Distributes a single video input to
two video outputs .
Website: www.seco-larm.com
@
E-mail: sales seco-larm.com
SECO-LARM U.S.A., Inc.
MiVC-1BxQZZ_1105.docx
PITSW4
Note: Products with model numbers that end with "Q" or that have a round green "Q" sticker are RoHS compliant.
BNC to VGA Converter
MANUAL
VC-1BAQ
(Power Adapter Included)
VC-1BBQ
(Power Adapter Not Included)