AOpen FM56-ITU/2 Manual page 19

Windows 2000:
1. Go to Contr ol Panel. Click System. Choose Har dwar e, and Device
Manager , then Por ts.
2. If the COM port that the modem is using is not listed, and enter the
correct Base I/O Port address and Interrupt Request Line.
Set the base I/O address according to the following table:
COM Port
1
2
3
4
3. Otherwise if the COM port is already listed. Click Phone and Modem
Options.
4. Choose Modems tab and click Add.
5. When you see "Install New Modem" box and choose "Don't detect my
modem, I will select it form a list". Click Next.
6. Highlight the port you want to install the modem on. Click Next.
7. When you see "Install New Modem" box and choose Have Disk.
8. Choose Br owse to indicate the correct path.
9. Select D:\Drivers\Win2K\Fm56-ITU-2. (D is your CD-ROM) Then click
on Open.
10. When you see the correct path and then click on OK.
11. Select the model of your modem and then click on Next.
12. Select the ports you want to install the modem and then click on Next.
13. If you want to continue installation and then click on Yes.
14. Windows has finished the installation and then click on Finish.
Windows NT4.0:
1. Go to Contr ol Panel. Click on Por ts.
2. If the COM port, click on Add. Enter the correct Base I/O Port address and
Interrupt Request Line.
Set the base I/O address according to the following table:
COM Port
1
2
3
4
3. If the COM port is already listed, highlight that COM port, click on
Settings, Advanced button, and select the proper base I/O address and
Interrupt line to match the modem's setting. Click OK to save.
Refer to Step#5 in the above Win95 section to finish installing the modem.
Base I/O Address
03F8
02F8
03E8
02E8
Base I/O Address
03F8
02F8
03E8
02E8