Wi-Fi Protected Setup (Wps); Using Wps To Connect To A Network - Epson XP-830 User Manual

9. Scroll down to view the SSID (Wi-Fi network name) and password.
10. Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the
LCD screen, then enter the password shown.
11. Press the
You see either an AP or Direct Wi-Fi symbol on the LCD screen and should be able to print directly
to your product from your computer or device.
Note: If the AP or Direct Wi-Fi symbol is not displayed on the LCD screen, Wi-Fi Direct mode is not
enabled. Repeat these steps to try again.
Parent topic:

Wi-Fi Protected Setup (WPS)

If your network uses a WPS-enabled wireless router or access point, you can quickly connect your
product to the network using Wi-Fi Protected Setup (WPS).
Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access
point. If there is no hardware button, there may be a virtual WPS button in the software for the device.
Check your network product documentation for details.

Using WPS to Connect to a Network

Parent topic:
Using WPS to Connect to a Network
If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to
connect your product to the network.
1. Press the
2. Select Setup.
3. Select Network Settings.
4. Select Wi-Fi Setup.
home button to exit.
Wi-Fi Direct Mode Setup
Wi-Fi or Wired Networking
home button, if necessary.
46