Kubota F2880 Operator's Manual page 8

4.0 Post-Mounting Instructions
Before starting a tractor equipped with a BOXER cab:
1. Clear the cab and tractor of all tools. Tools left in or around the cab and tractor
can cause operator interference which could lead to bodily injury and/or damage to
the machine.
2. Inspect the cab and tractor to ensure all bolts, screws, and heater connections are
tight.
3. Ensure that all pedals, levers, and controls have adequate clearance for normal
operation.
4. Ensure that all electrical components of both the cab and tractor operates
normally.
Start the tractor and run standing at idle for a few minutes. Operate all pedals,
levers, and controls checking for adequate cab clearance. Then run standing at
PTO rpm speed for approximately five minutes and stop the tractor.
1. Inspect the heaters connections for leaks. Tighten as required.
2. Ensure that the water level in the tractor is to the required specification.