Physical Installation - Planet ICA-601 User Manual

2.1.2 Physical Installation

1. During the installation, please take care and avoid crash. That may cause the de-
vice damage.
Note
2. Please make sure the hardware had been located on the cell or roof properly. If
the hardware drops down, it is possible make someone hurt. Please check the
hardware again after the installation.
1. Cut a 218~220mm diameter hole on false ceiling (according to speed dome outer cover).
The ceiling needs to embed the 115mm depth speed dome IP cam body.
2. Take away the 3pcs leaf springs inside the accessory box. Attach the springs onto the
outer cover. According to thickness of ceiling to adjust the location of springs. Find springs
directions as following photo: