Kubota ME5700 Workshop Manual page 58

ME5700, WSM
Crankshaft Nut Socket 46
Code No : 07916-30821
Application : Use exclusively for removing or installing the
crankshaft nut.
Flywheel Puller
Code No : 07916-32011
Application : Use exclusively for removing the flywheel with
ease.
Valve Seat Cutter
Code No : 07909-33102
Application : Use to reseat valves.
Angle : 0.785 rad (45 )
0.262 rad (15 )
Diameter : 28.6 mm (1.126 in.)
31.6 mm (1.244 in.)
35.0 mm (1.378 in.)
Connecting Rod Alignment Tool
Code No : 07909-31661
Application : Use to check the connecting rod alignment.
Applicable : Connecting rod big end I.D.
range 30 to 75 mm (1.18 to 2.95 in.) dia.
Connecting rod length
65 to 300 mm (2.56 to 11.81 in.)
G-41
GENERAL
0000003101E
0000003102E
38.0 mm (1.496 in.)
41.3 mm (1.626 in.)
50.8 mm (2.000 in.)
0000000682E
0000000684
KiSC issued 04, 2006 A