Kubota ME5700 Workshop Manual page 274

ME5700, WSM
3. TIGHTENING TORQUES
Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts : See page G-10.)
Rear wheel mounting nut
ROPS upper frame mounting screw
ROPS mounting screw
Fender mounting screw
Cabin mounting bolt and nut
Cabin mount bracket mounting screw
Rear axle case mounting screw and nut
Item
9/16 UNF, grade 8 screw
M16, grade 9 screw
3/8-16 UNF, grade 8 screw
M12 screw and nut
260 to 304 26.5 to 31.0
149 to 179 15.2 to 18.3
260 to 304 26.5 to 31.0
47.0 to 53.9
124 to 147 12.6 to 15.0
197 to 225 20.0 to 23.0
77.5 to 90.2
5-S3
ft-lbs
192 to 224
110 to 132
192 to 224
4.8 to 5.5 34.7 to 39.8
91.2 to 108.0
145 to 166
7.9 to 9.2 57.1 to 66.5
0000002811E
KiSC issued 04, 2006 A
BRAKES