IDTECK Star 100R User Manual page 19

12-23. Change Alarm Time When Try-Out Error Detected
Configuration Card
/Configuration PIN
12-24. Change Alarm Time When Door Contact Error Detected
Configuration Card
/Configuration PIN
12-25. Change Alarm Time When AUX Input #1 Detected
12-26. Change Alarm Time When AUX Input #2 Detected
12-27. Change Alarm Time When AUX Input #3 Detected
Configuration Card
/Configuration PIN
12-28. Change Alarm Time When Magnet Detected
Configuration Card
/Configuration PIN
12-29. Register 2 Digit Duress Alarm Password
Configuration Card
/Configuration PIN
Note: '00' is registered as defaulted Password.
(Refer to Table 1 for OM,
Command Output Mode
(Refer to Table 1 for OM,
Door Open Time-out setting is required for activating, refer to 12.81.
Command Output Mode
(Refer to Table 1 for OM,
Command Output Mode
(Refer to Table 1 for OM,
Command Output Mode
(PW=00~99, Defaulted PW= 00, Do not use
Command Password
tt
=00~99 sec., Defaulted Alarm time = 10 sec.)
Door time
tt
=00~99 sec.)
Door time
tt
=00~99 sec.)
Door time
tt
=00~99 sec.)
Door time
19
Alarm Time TTL time
Alarm Time TTL time
Alarm Time TTL time
Alarm Time TTL time
)