Using Usb Bus Power - Asus 54Mbps Pocket Wireless Access Point WL-330g User Manual

2.2.3 Using USB bus power

1. Insert one end of the supplied RJ-45 cable to the WL-330g Ethernet port.
2. Insert the other end of the RJ-45 cable to the Ethernet port on your
computer, notebook, network hub, switch, router, or wall patch panel.
3. Insert one end of the supplied USB cable to the DC-IN socket of the
device.
4. Insert the other end of the USB cable to any available USB port on
your computer, notebook, network hub, switch, or router.
5. Turn on your computer/notebook, or connect the network hub, switch,
or router power adapter to a wall socket.
6. Connect the power adapter of the network hub, switch, or router to a
wall socket.
Wall socket
2-4
6
Switch
USB
5 4
WL-330g
2 1
Chapter 2: Installation
3