Using The Wireless Setting Utility - Asus 54Mbps Pocket Wireless Access Point WL-330g User Manual

3.2.2 Using the Wireless Setting Utility

To set the device as an access point (AP)
Make sure that you switched the WL-330g to AP mode before launching
the Wireless Setting Utility. Use the mode switch to change the device
operating mode.
1. The utility auto-detects and
displays the WL-330g SSID,
channel, encryption, MAC, and IP
address. Click Configure to
change these settings.
2. Log on to the configuration window
using the password (admin), check
the Remember my password
option, then click OK.
Checking the Remember my password option allows the utility to
auto-fill the password everytime you enter the Wireless Setting
configuration. Refer to page 3-20 for details on changing the log-on
password.
3-4 Chapter 3: Configuration