Asus 54Mbps Pocket Wireless Access Point WL-330g User Manual page 38

Click the Associated Stations link (beside the SSID) to displays the list of
wireless device(s) associated with the ASUS Pocket Wireless AP. The list
includes the wireless device(s) MAC address and connection status.
Channel. Allows you to specify the channel the device uses to communicate
with other wireless device(s) in the network.
The 802.11g specification supports up to 13 overlapping channels for radio
communication. If several ASUS Pocket Wireless APs are operating in the
same area, assign a non-overlapping channel to each device to avoid
interference. Refer to page 3-21 for channel information.
Operation Mode. You can adjust the WL-330g operating mode to support
wireless devices using IEEE 802.11b or IEEE 802.11g standards. Setting the
operating mode to mixed allows the WL-330g to support both wireless
standards.
Table 3-2: WL-330g operating modes
Operation mode
B only
G only
Mixed
Transmit Rate. This option allows you to specify the data transmission rate
for both IEEE 802.11b and IEEE 802.11g devices. Select from 54, 48, 36,
24, 18, 12, 11, 9, 6, 5.5, 2 and 1Mbps data transfer rate.
Preamble. Allows you to set the preamble mode for a 2.4GHz/11Mb network
to Long, Short, or Auto. The default preamble mode is Long.
3-14
Supported wireless client(s)
IEEE 802.11b client(s) only
IEEE 802.11g client(s) only
IEEE 802.11b and IEEE 802.11g clients
Chapter 3: Configuration