GreatCall Jitterbug5 User Manual page 118

4. Press the button to "Send".
5. To create your own message use the "Up/Down"
"Customize" appears. Press the
Message.
6. To use the Jitterbug Library of pre-written Text Messages, use the "Up/Down"
button to scroll until "Library" appears. Press the
Down" button to scroll through and find the desired message.
7. Press the button when you are done typing your message. You will automatically
go to your Phone Book. Use the "Up/Down"
8. Press the button when the contact to whom you wish to send the Text
Message is in the middle of your Inside Display.
9. After you press the
Inside Display.
button and use the keypad to type your Text
button, you will see the words "Sending Message" on the
button and scroll until
button and again, use the "Up/
button to scroll through your contacts.
Using Text Messaging 109