Blind Spot Monitoring Fault Warnings; General Information - Fiat 2016 500X Owner's Manual

NOTE: The BSM system will store the current operating
mode when the vehicle is shut off. Each time the vehicle
is started the previously stored mode will be recalled and
used.

Blind Spot Monitoring Fault Warnings

Sensor Blinded
In the case of a sensor blinded:
• BSM Mirror Warning Lights are turned on continuously.
• A instrument cluster message will display "Blind Spot
Monitoring Unavailable - Wipe Rear Bumper Corners."
NOTE: The rear bumper must be clean and free of any
obstructing debris.
System Not Available
In the case of the system being temporary unavailable:
• BSM Mirror Warning Lights are turned on continuously.
• A instrument cluster message will display "Blind Spot
Monitoring Temporary Unavailable."
In the case of the system being completely unavailable:
• A chime will turn on.
• A instrument cluster message will display "Blind Spot
Monitoring Unavailable - Service Required."
NOTE: Vehicle must be taken to the nearest authorized
dealer for service.

General Information

This vehicle has systems that operate on radio frequency
that comply with Part 15 of the Federal Communications
Commission (FCC) rules and with Industry Canada
Standards RSS- GEN/210/220/310.
Operation is subject to the following two conditions:
1. The device may not cause harmful interference.
I n f o r ma t i o n P r o v i d e d b y :
GETTING TO KNOW YOUR VEHICLE 91
4