Table of Contents
Advertisement
Serial ATA (SATA)
Power Cable
(Optional)
USB 2.0 Header
(9-pin USB67)
(see p.9, No. 19)
USB 2.0 Header
(9-pin USB_H45)
(see p.9, No. 20)
Infrared Module Header
(5-pin IR1)
(see p.9, No. 30)
Internal Audio Connector
(4-pin CD1)
(see p.9, No. 26)
Front Panel Audio Header
(9-pin AUDIO1)
(see p.9, No. 28)
Bridge Fan Connector
(3-pin NB_FAN1)
(see p.9, No. 16)
This Manual: http://www.manuallib.com/file/2448158
connect to the SATA HDD
power connector
USB_PWR
P-6
1
P-7
USB_PWR
USB_PWR
P-5
1
P-4
USB_PWR
1
CD-R
GND
GND
CD-L
GND
1
MIC
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
connect to the
power cable to the power
power supply
connector of the power supply.
ASRock 8CH I/O provides you
P+6
4 ready-to-use USB 2.0 ports on
GND
DUMMY
the rear panel. If the rear USB
ports are not sufficient, this
GND
P+7
USB 2.0 header is available to
support 2 extra USB 2.0 ports.
ASRock 8CH I/O
P+5
GND
4 ready-to-use USB 2.0 ports on
DUMMY
the rear panel. If the rear USB
ports are not sufficient, this
GND
P+4
USB 2.0 header is available to
support 2 extra USB 2.0 ports.
IRTX
This header supports an optional
+5V
DUMMY
wireless transmitting and
receiving infrared module.
GND
IRRX
This connector allows you to
receive stereo audio input from
sound sources such as a CD-
ROM, DVD-ROM, TV tuner card,
or MPEG card.
This is an interface for the front
+5VA
BACKOUT-R
panel audio cable that allows
BACKOUT-L
convenient connection and
control of audio devices.
AUD-OUT-L
GND
AUD-OUT-R
MIC-POWER
Please connect the Bridge fan
cable to this connector and
GND
+12V
CHA_FAN_SPEED
match the black wire to the
ground pin.
1 9
TM
provides you
Advertisement
Table of Contents
