Installation Of Memory Modules (Dimm) - ASROCK K8 Combo-Z User Manual

Hide thumbs Also See for K8 Combo-Z:

User manual (39 pages)

Table Of Contents

Table of Contents

2.4

This motherboard is equipped with five 184-pin DDR (Double Data Rate) DIMM slots.

For 939-Pin CPU users, please install the DIMM into DDR1, DDR2 and DDR3 slots (see

Page 9, No. 32). DDR1 and DDR2 slots support Dual Channel Memory Technology.

Since there are some limitations from AMD, please follow the table below for proper

configuration. Otherwise, the system may not boot up! For best compatibility of dual

channel configuration, it is highly recommended to install two identical (the same

brand, speed, size and chip-type) memory modules into the DDR DIMM slots to

activate Dual Channel Memory Technology. If you have two non-identical DDR

SDRAMs, please install them into DDR1 and DDR3 for 64-bit mode. Besides, please do

not install 3 DDR DIMMs into DDR1, DDR2, and DDR3 at the same time. Otherwise, the

system cannot boot up!

II.

For 754-Pin CPU users, please install the DIMM into DDR4 and DDR5 slots (see

Page 9, No. 5). Please note that DDR4 and DDR5 slots DO NOT support Dual Channel

Memory Technology.

This Manual: http://www.manuallib.com/file/2448158