Setting Up The Equipment; Set Up The Monitor; Attach The Indoor Camera - Uniden BW34 Series Owner's Manual

SETTING UP THE EQUIPMENT

Set Up the Monitor

1. If you are using the monitor as a stand-alone unit, flip out the stand on the back of the monitor,
and extend the antenna. Connect an AC adaptor to the power input on the side of the monitor.
If you are using the monitor in the cradle, insert the monitor into the cradle and connect an AC
adaptor to the power input on the back of the cradle.
2. Connect the other end of the adaptor to a 240 volt AC (standard indoor) power outlet.
3. Press and hold the
4. The monitor displays the Uniden Welcome screen for a few seconds and then transitions to the
LIVE view.
The screen remains dark until the cameras are powered up.

Attach The Indoor Camera

Slide the camera on to the stand swivel mount until it clicks in place.
8
button on the top of the monitor for 3 - 4 seconds to power it up.
POWER