ECS Elitegroup P4M8OOPRO User Manual page 9

Onboard LAN (Optional)
The onboard LAN controller provides either of the following features:
• Integrates 10/100/1000 transceiver
• Supports PCI v.2.3, 32-bit, 33/66 MHz
• Crossover Detection & Auto-Correction
• Wake-on-LAN and remote wake-up support
• Supports 10 Mb/s and 100 Mb/s N-way Auto-negotiation operation
• Half/Full duplex capability
• Supports Wake-on-LAN (WOL) function and remote wake-up
• Integrates 10/100/1000 transceiver
• Supports PCI v.2.3, 32-bit, 33/66 MHz
• Supports fully with IEEE802.3, IEEE 802.3u and IEEE802.3ab
Expansion Options
The motherboard comes with the following expansion options:
• One AGP slot
• Three 32-bit PCI v2.2 compliant slots
• Two 40-pin IDE connectors supporting up to 4 IDE devices
• One floppy disk drive interface
• Two 7-pin SATA connectors
This motherboard supports UltraDMA bus mastering with transfer rates of 133/100/66
MB/s.
Integrated I/O
The motherboard has a full set of I/O ports and connectors:
• Two PS/2 ports for mouse and keyboard
• One serial port
• One parallel port
• One VGA port
• Four USB ports
• One LAN port (optional)
• Audio jacks for microphone, line-in and line-out
BIOS Firmware
This motherboard uses AMI BIOS that enables users to configure system features includ-
ing the following:
• Power management
• Wake-up alarms
• CPU parameters
• CPU and memory timing
The firmware can also be used to set parameters for different processor clock speeds.
Some hardware specifications and software items are subject to change
without prior notice.
Introducing the Motherboard
3