Standard Cmos Setup; Advanced Setup - ECS Elitegroup P4M8OOPRO User Manual

30

Standard CMOS Setup

This option displays basic information about your system.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
System Time
System Date
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
SATA1
SATA2
Floppy A
< >
F1:General Help
System Date and Time
The Date and Time items show the current date and time on the computer. If
you are running a Windows OS, these items are automatically updated whenever you make
changes to the Windows Date and Time Properties utility.
Primary/Secondary IDE Master/Slave, SATA1~2
Your computer has one IDE channel and each channel can be installed with one or two
devices (Master and Slave). In addition, this motherboard supports two SATA channels and
each channel allows one SATA device to be installed. Use these items to configure each
device on the IDE channel.
Floppy A
This item sets up size and capacity of the floppy diskette drive(s) installed in the system.
Press <Esc> to return to the main menu setting page.

Advanced Setup

This page sets up more advanced information about your system. Handle this page with
caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Quick Boot
1st Boot Device
2nd Boot Device
3rd Boot Device
Try Other Boot Device
Bootup Num-Lock
Aperture Size Select
DRAM Timing
Auto Detect DIMM/PCI Clk
Spread Spectrum
Max CPUID Value Limit
Execute Disable Bit
CPU TM function
TM Status
C1E Support
Intel (R) SpeedStep (tm) tech.
Vanderpool Technology:
BIOS Protect
< >
F1:General Help
Standard CMOS Setup
00: 01: 16
Wed 08/23/2006
Hard Disk
Not Detected
Not Detected
Not Detected
Not Detected
Not Detected
1 ..44 MB 3 / "
1
2
: Move Enter : Select +/-/: Value
F9: Optimized Defaults
Advanced Setup
Enabled
1st FLOPPY DRIVE
Maxtor 6Y120P0
CD/DVD
Yes
On
64MB
Auto
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Enabled
Disabled
: Move
Enter : Select +/-/: Value
F9: Optimized Defaults
Using BIOS
Help Item
Use [ENTER], [TAB]
or [SHIFT-TAB] TO
select a field.
Use [+] or [-] to
configure system Time.
F10: Save
ESC: Exit
Help Item
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
F10: Save ESC: Exit