Head Cooling Fan 1 - Oki Pacemark 4410 Service Handbook

3.3.13 Head Cooling Fan 1

(1) Remove Cover Assy Access / Cover Assy Side (R) / Cover Assy Side (L) /Cover Assy Front
/ Frame Assy Rear / Plate Front (stuck). (See 3.3.1)
(2) Unplug the connector 1 from Junction Board (PRA Printed Board)(CN6) 6.
(3) Release the cords from the cord clamps on the cord route.
(4) Unscrew 2 screws 2 and remove SP Motor Fan Assy 3.
(5) Unscrew 2 screws 5 and remove Head Cooling Fan 1 5.
(6) For installation, reverse the removal procedure.
(Note on Installation)
1. The fan should be installed, matching the direction of air flow to the direction of arrow shown
in the figure.
40496501TH Draft Version
6
CN6
Air Flow
5
3
1
2
4
66