A Printer does not operate at all, while the Alarm Lamp is on and "ERROR FUSE" is displayed on LCD.
•
The cable to PMA-Board CN3 connected properly?
Yes
No
•
Connect the cable properly.
•
The cable to Printer Unit Connector DCOUT2 connected properly?
Yes
No
•
Connect the cable properly.
•
PMA-Board F1 and F2 mounted?
Yes
No
•
Install them.
•
PMA-Board F1 and F2 blown?
No
Yes
•
Replace the blown-out fuse. Recovered?
No
•
Turn Printer on, with PMA-Board CN2 and CN6 unplugged. Are the fuses blown?
No
•
Turn Printer on, with PMA-Board CN2 unplugged. Are the fuses blown?
40496501TH Draft Version
Yes
•
End
Yes
•
Which fuse is blown, F1 or F2?
F1
F2
•
Short circuit occurs at PDA-Board, between HTA1-5 pin and 4
pin and between HTA1-1 pin and 2 pin?
No
Yes
•
Replace PDA-Board.
•
Replace PMA-Board.
•
Replace PMA-Board.
145