No
Yes
•
Replace Ink Ribbon Cartridge.
•
Check the ribbon route in Ink Ribbon Cartridge. Is it normal? XXX rotating?
Yes
No
•
Set the ink ribbon on the correct route.
•
Ink Ribbon Rotation Sensor mounted properly?
Yes
No
•
Install the sensor properly.
•
The cables to PRA-Board CN4 and CN1 connected properly?
Yes
No
•
Connect the cables properly.
•
The cable to PMA-Board CN2 connected properly?
Yes
No
•
Connect the cable properly.
•
Check the Ribbon Rotation Sensor wave form at PRA-Board. No problem?
Ribbon Rotation Sensor: Examine between CN4-5 pin and SH4.
Yes
No
•
Replace the Cover Open Switch/Ribbon Rotation Sensor cable.
•
Replace PMA-Board. Recovered?
No
Yes
•
End
•
Replace PRA-Board. Recovered?
No
Yes
•
End
•
Replace the junction cable.
40496501TH Draft Version
142