Citizen CT-S251 User Manual page 51

Switch no.
MSW13-1 Security/Target
MSW13-5 BT Device Scan
MSW13-6 Auto Reconnect
Note:
*: If print data is very dense, the print head is hot, data transmission is slow, or some other conditions, the
motor and printing may occasionally stop which causes white stripes in the printout. To print high-density
data, set MSW2-3 (Spool Print) to ON to reduce striping, although this increases the time before printing
starts.
For a serial interface, increase the transmission speed to prevent the motor from stopping.
Function Initial setting
Low/All
Discoverable No Response, Discoverable
Valid
Low/All, Mid/All, Mid/Paired only, Hi/All, Hi/Paired
only
Invalid, Valid
— 48 —
Setting value