Citizen CT-S251 User Manual page 20

CAUTION
 Before configuring the top margin suppression setting, first remove any partially cut paper
from the printer. Failure to do so can cause the cut paper to be torn off by the next print
operation, which can cause printer trouble.
 Auto side shift (MSW8-6)
This function dissipates heat load during frequent heat generation by a vertical
ruled line or other specific head heating element.
If no data is received within 15 seconds after each cut or print, the print position is
automatically slid N
the next slide timing.
N is the MSW8-6 setting value.
*
CAUTION
 If the right margin is too narrow, this may result in some print characters being cut off.
 This function is disabled under initial settings.
 To enable this function, use MSW8-6 to specify an appropriate value for the maximum slide
amount.
dots to the right. The original print position is returned to at
*
— 17 —