Sfp+ Optical Module (10Ge) Attributes; Optical/Electrical Module (Ge) Attributes - Huawei S5700 Series Hardware Description

S5700&S5710 Series Ethernet Switches
Hardware Description

7.5 SFP+ Optical Module (10GE) Attributes

This section describes the attributes of an SFP+ optical module (10GE).
Table 7-5 SFP+ optical module (10GE) attributes
Item
Transmission
distance
Center
wavelength
Transmitting
power
Receiver
sensitivity
Overload power
Extinction ratio
Connector type
Fiber type

7.6 Optical/Electrical Module (GE) Attributes

This section describes the attributes of Optical/Electrical Module(GE).
Table 7-6 Attributes of optical/electrical modules
Attribute
Connector
Standards
compliance
Frame format
Issue 01 (2012-03-15)
NOTE
The ESFP CWDM-SFP optical module is applicable to only the 100M SFP optical interfaces or 1000M
SFP optical interfaces or 100M/1000M SFP optical interfaces or GE SFP/10G SFP+ Optical Interface.
Description
0.22 km
1310 nm
-6.5 dBm to -0.5
dBm
-6.5 dBm
1.5 dBm
3.5 dB
LC
Multi-mode
NOTE
The SFP+ optical modules (10GE) are applicable to only 10G SFP+ optical interfaces.
Description
RJ45
IEEE802.3z
Ethernet_II, Ethernet_SAP, or Ethernet_SNAP
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
0.3 km 10 km
850 nm 1310 nm
-7.3 dBm to -1.0 -8.2 dBm to 0.5
dBm dBm
-11.1 dBm -12.6 dBm
-1.0 dBm 0.5 dBm
3.0 dB 3.5 dB
Single-mode
7 List of Optical Modules
40 km
1550 nm
-4.7 dBm to 4.0
dBm
-14.1 dBm
-1.0 dBm
3.0 dB
135