Huawei S5700 Series Hardware Description page 113

S5700&S5710 Series Ethernet Switches
Hardware Description
Display Mode
The S5700-28C-EI and S5710-28C-EI are non-PoE switches with dual power supply units.
Figure 6-4 S5700-28C-EI indicators
Table 6-7 Description of S5700-28C-EI indicators
No.
1
Issue 01 (2012-03-15)
Status
Blinking green
Indicator Identifier
Power PWR1
indicator
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
The device is a command switch:
l If the indicator of an interface
blinks, the number of this
interface is the stack ID of the
device.
l If the first nine interface
indicators of the device blink,
the stack ID of the device is 0.
Status Description
Off The power supply
units are not present,
or the power supply is
abnormal when a
single power supply
unit is used.
Green The power supply is
normal.
Red l Two power supply
l The power supply
l The power supply
6 List of Indicators
2 3
4 1
5
units are installed
properly, but not
switched on.
units are switched
off.
units are faulty.
105