Huawei S5700 Series Hardware Description page 106

S5700&S5710 Series Ethernet Switches
Hardware Description
As shown in
the mode switching button once, the mode indicator turns green and the related interface indicator
enters the speed state. When you press the mode switching button for a second time, the mode
indicator turns red and the related interface indicator represents the stack status. When you press
the mode switching button for a third time, the mode indicator restores to the default state (off).
If you do not press the mode switching button within 45 seconds, the mode indicator
automatically restores to off. The following table describes the meanings of indicators.
Table 6-3 Description of indicators in different modes
Display Mode
STAT
Speed
Stack
Issue 01 (2012-03-15)
Figure 6-1, the button marked "5" is the mode switching button. When you press
Status
Off
Green
Blinking green
Off
Green
Blinking green
Off
Green
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 List of Indicators
Description
The interface is not connected or
has been shut down.
The interface is connected.
The interface is sending or
receiving data.
The interface is not connected or
has been shut down.
10M/100M/1000M interface: The
interface is operating at 10/100
Mbit/s.
1000M/10G interface: The
interface is operating at 1000
Mbit/s.
10M/100M/1000M interface: The
interface is operating at 1000
Mbit/s.
1000M/10G interface: The
interface is operating at 10 Gbit/s.
The stack ID of the member
switch is not the number of the
interface in the off state.
The device is a not a command
switch:
l If the indicator of an interface
is steady on, the number of this
interface is the stack ID of the
device.
l If the first nine interface
indicators of the device are
steady on, the stack ID of the
device is 0.
98