Final Checks; Fitting The Plinth; Customer Care - Rangemaster Professional + 100 User's Manual & Installation Instructions

Check the appliance is electrically safe and gas sound when you have finished.

Final Checks

Hotplate Check
Check each burner in turn (refer to the 'Hotplate Burners'
section at the front of the instructions).
Grill Check
Turn on the grill control and check that the grill heats up.
Oven Check
Set the clock as described earlier in the instructions, and then
turn on the ovens. Check that the oven fans start to turn and
that the ovens start to heat up.
Note: The oven light bulb is not included in the guarantee.
Turn off the oven.

Fitting the Plinth

Fitting the 1-piece Plinth
Loosen the three screws along the front bottom edge of the
cooker. Hook the central keyhole over the central screw. Twist
and fit each end keyhole over their respective screws. Tighten
the fixing screws (Fig. 8.14).
Fitting the 2-piece Plinth
Fit the inner plinth to the bottom front of the cooker using
the 4 or 5 screws provided (Fig. 8.15).
Kitchener: Fit the outer plinth (2 screws, 1 each end) to the
inner plinth. The height of the outer plinth can be adjusted by
sliding it up or down via the slotted hole (Fig. 8.16).
Hi-LITE: Offer the keyhole slots on the outer plinth to the
location points on the inner plinth (Fig. 8.17)
When released the outer plinth should automatically adjust
to the floor height (Fig. 8.17).
WARNING: When moving the cooker ensure that the
n n
outer plinth is removed. Failure to do so may result
in damage to plinth and floor.

Customer Care

Installer: Please complete your details in this guide, inform
the user how to operate the cooker and hand over the
instructions.
Thank you.
INSTALLATION
(Classic & Professional+)
(Kitchener & Hi-LITE)
ArtNo.350-0012 - Securing the plinth
ArtNo.350-0010 - Fitting the plinth 1 (Kitchener)
ArtNo.350-0011 - Fitting the plinth 2 (Kitchener)
Inner plinth
27
Outer plinth
Outer plinth xing screw
Fig. 8.14
Fig. 8.15
Fig. 8.16
Fig. 8.17