Setting Top Of Form (Tof) - Oki ML690 User Manual

Setting Top of Form (TOF):

Notes:
Adjusting the TOF can be done in cut sheet or
continuous forms mode.
If necessary, print the menu settings to
determine where the current TOF is set.
The default TOF is set at 11/12" (23.28 mm).
With paper loaded and the printer on and selected:
Align the paper with the first print line position as
1.
follows:
To set the TOF lower (the first line of print on

the page moves down), press and hold down
the
LOAD/EJECT
time.
To set the TOF higher (the first line of print on

the page moves up), press and hold down the
and
LOAD/EJECT
The paper moves in increments of 1/180".
When you have the TOF set where you want it,
.
press and hold
SEL
new setting.
Note: To reset the Top of Form to the factory default,
see "Resetting Top of Form to the Factory
Default" later in this chapter.
and keys at the same
SEL
keys at the same time.
LF/FF
, then press to save the
LF/FF
ML690/ML691 User's Guide