Hilti DX 450 Operating Instructions Manual page 11

EC declaration of conformity (original)
Designation:
Type:
Year of design:
We declare, on our sole responsibility, that this product complies with the
following directives and standards: 2006/42/EC, 2011/65/EU.
Hilti Corporation, Feldkircherstrasse 100, FL-9494 Schaan
Norbert Wohlwend
Head of Quality & Processes Management
BU Direct Fastening
08/2012
Technical documentation filed at:
Hilti Entwicklungsgesellschaft mbH
Zulassung Elektrowerkzeuge
Hiltistrasse 6
86916 Kaufering
Deutschland
Printed: 24.03.2014 | Doc-Nr: PUB / 5125252 / 000 / 02
Confirmation of CIP testing
The Hilti DX 450 has been system and type tested. As a result, the tool bears the PTB approval
Powder-actuated tool
mark of square shape showing approval number S 805. In this way, Hilti guarantees compliance
with the approved type.
DX 450
Unacceptable/inadmissible defects, deficiencies, etc. that are determined during use of the tool
must be reported to the manager responsible at the approval authority (PTB) and to the Office of
1976
the Permanent International Commission (C.I.P.).
Tassilo Deinzer
Head BU Measuring Systems
BU Measuring Systems
08/2012
21