Channel Settings - Sharp CX68K5 Operation Manual

Channel Settings

Channel Settings
Picture system settings for each channel
Remote control
TV/VIDEO
1 2 3
4 5 6
7 8 9
0
3 , 5
CH CH
CH CH
MENU
NORMAL
POWER
MPX
SAVE
2 , 4
1 , 6
TV
NOTE :
• Switching COLOUR system.
Set the system to AUTO for normal TV reception. The AUTO mode automatically detects the receiving signal
system and changes the reception system of the TV set. When the picture is not stable, switching to an appropriate
system may improve the picture quality.
1
Press the MENU button to call the MENU
screen.
2
Press the CHANNEL UP (
DOWN ( ) buttons to select "CH-
CH
SETTING".
3
Press the VOLUME UP (
( ) buttons to display the CH-SETTING
menu.
4
Press the CHANNEL UP (
DOWN ( ) buttons to select the
CH
desired function mode.
5
Press the VOLUME UP (
( ) buttons to adjust function settings:
• POSITION :
The channel position changes to the upper or
low number.
• COLOUR :
The mode changes in the following order:
AUTO PAL
below)
• SKIP :
When skip is set to ON, that channel can no
longer be selected with the CHANNEL UP (
CH
) or DOWN ( CH ) buttons - only
with the numeric buttons on the remote con-
trol. The mode changes in the following order.
ON OFF
Channel numbers with a red dot on the left are
set to SKIP. To turn off SKIP, press the CHAN-
NEL SELECT buttons to select the desired
channel, then set the SKIP mode on the CH-
SETTING menu to "OFF".
• FINE :
The frequency changes to allow ne tuning
6
Press the MENU button until the normal
screen appears.
NOTE :
• When you select the channel position
AV1, AV2 or AV3, the CH-SETTING menu
changes as shown on the right, and the
colour mode changes in the following order.
AUTO PAL N 443
10
(MENU screen)
) or
CH
MENU
PICTURE
SOUND
FEATURE
TIMER
CH-SETTING
) or DOWN
) or
CH : SELECT
CH
: ADJUST
) or DOWN
(CH_SETTING menu)
CH-SETTING
POSITION
COLOUR
SKIP
FINE
(See Note
CH : SELECT
: ADJUST
CH-SETTING
POSITION
COLOUR
CH : SELECT
: ADJUST
N 358
MENU : RETURN
CH27
AUTO
OFF
168.25MHz
MENU : RETURN
AV1
AUTO
MENU : RETURN