Table of Contents
Advertisement
Q-Drive Installation Manual
7.10
Status & Alarm page
Pressing function key <F7> from any of the nine pages will bring up the status page as
shown above. This page gives a continually updated display of all alarms and the
current status of the drive and is particularly useful whilst commissioning the drive.
Whilst this page is displayed it is possible to change from one drive to another to obtain
the new drive's current status. If a non existent drive is selected, i.e. drive 6 in a 5 drive
system then the display will continue to show the previous drive's values except for the
top line which will show
"Axe 6 ONLINE no connect"
i
Earth Defect:-
If the optional Earth Fault module is fitted and the Q-Drive is supplied from
an Auto-transformer then this alarm indicates a problem with the amplifier
earthing
ii
EEPROM Fault
The amplifier has been unable to read data from the EEPROM non-volatile
memory or the data is corrupt
iii
Resolver Fault
The resolver or the connections to it are faulty and the system can no longer
read the resolver.
iv
RDC Fault
The part of the system designed to convert the resolver signals into digital
signals is faulty.
Page 44
Figure 21. Q-Drive.exe: status display
Copyright © 1996 Quin Systems Ltd.
Issue 1.5
Hide quick links:
Advertisement
Table of Contents
