P10, P11 & P12; Figure 6: P10, P11, P12: Discrete Signals; Table 8: P10, P11, P12 Connections - Quin Q-drive Installation & User Manual

Issue 1.5
4.2.5 P10, P11 & P12
These connectors are used for interfacing all other low voltage signals to the drive and
are detailed below in Table 8: Figure 6. shows the pin 1 & 2 socket of connector P10,
Pin Number.
P10.1.
P10.2.
P10.3.
P10.4.
P11.1.
P11.2.
P11.3.
P11.4.
P12.1.
P12.2.
P12.3.
P12.4.
P11 & P12 already inserted into their respective mating half, whilst the pin 3 & 4
connectors are shown waiting to be inserted.
Copyright © 1996 Quin Systems Ltd.
Signal Name.
Earth.
Gnd.
S+.
S-.
EXTILIM. External current limit,+10V
+12V Bat. External 12V battery +ve.
RDY2.
RDY1.
-12V Bat. External 12V battery -ve.
BGnd.
024V.
ENABLE.

Table 8: P10, P11, P12 Connections

4
3
4
2
1
2
1
2
Figure 6. P10, P11, P12: discrete signals
Q-Drive Installation Manual
Function.
Command shield connection.
Drive internal Ground (not isolated).
Command signal +ve.
Command signal -ve.
corresponds to max peak current.
Volt free drive ready relay contact.
Volt free drive ready relay contact.
External 12V battery Gnd.
0V for ENABLE signal.
Drive enable signal from controller.
2
1
P
3
1
1 P
4
0
1
P
1 0 1
P
Page 19