Rail King 4-6-4 Hudson Steam Locomotive Operator's Manual
  1. Manuals
  2. Brands
  3. Rail King Manuals
  4. Toy
  5. 4-6-4 Hudson Steam Locomotive
  6. Operator's manual

Rail King 4-6-4 Hudson Steam Locomotive Operator's Manual

4-6-4 hudson steam locomotive
Hide thumbs Also See for 4-6-4 Hudson Steam Locomotive:
Table of Contents

Advertisement

Quick Links

Download this manual
4-6-4 Hudson Steam Locomotive
OPERATOR'S MANUAL
Compatibility
This engine will operate on any
traditional O-31 Gauge track system,
including M.T.H. ' s RealTrax® or
ScaleTrax™ or traditional tubular
track. It is also compatible with most
standard AC transformers. (See page
23 for a complete list of compatible
Passenger Station Announcement
transformers and wiring instructions.)
PLEASE READ BEFORE USE AND SAVE

Advertisement

Table of Contents
loading

Related Manuals for Rail King 4-6-4 Hudson Steam Locomotive

Summary of Contents for Rail King 4-6-4 Hudson Steam Locomotive

  • Page 1 4-6-4 Hudson Steam Locomotive OPERATOR’S MANUAL Compatibility This engine will operate on any traditional O-31 Gauge track system, including M.T.H. ’ s RealTrax® or ScaleTrax™ or traditional tubular track. It is also compatible with most standard AC transformers. (See page...

  • Page 2: Table Of Contents

    Table of Contents Set Up Checklist......................Lubrication....................... Priming the Smoke Unit................. Placing the Engine on the Track..............Checking the Battery..................Basic Operation......................Activating Features................... Manual Volume Control.................. Proto-Sound 2.0 Operating Instructions..............Activating Proto-Sound 2.0 Conventional Mode Features......Passenger Station Annoucements (PSA)............. Proto-Coupler®...

  • Page 3: Set Up Checklist

    Set Up Checklist - Lubricate the locomotive - Check to see whether the battery needs to be charged for full sound effects - Prime the smoke unit - Apply power to run as described in the Basic Operating Section of this manual Lubrication You should lubricate the engine to prevent it from squeaking.

  • Page 4: Placing The Engine On The Track

    Placing the Engine on the Track Place the engine on the track, then insert the reverse unit plug that extends out of the tender into the receptacle at the back of the boiler cab (Figure 3. WARNING: DO NOT CONNECT THIS ENGINE TO A TENDER FROM ANOTHER ENGINE;...

  • Page 5: Basic Operation

    Basic Operation The Throttle knob controls how fast your train will travel. Turn the throttle knob up ½-way, until the engine and caboose lights shine bright. Put the engine into motion by pressing the Direction button on your transformer once. (hold it for approximately 1 second) If the engine does not begin to move as soon as you firmly press the Direction button, you may not have sent enough voltage to the track to make the train move.

  • Page 6: Manual Volume Control

    Manual Volume Control To adjust the volume of all sounds made by this engine, turn the master volume control knob located under the tender clockwise to increase the volume and counter-clockwise to decrease the volume. Figure 4. Manually Adjust The Volume RailKing 4-6-4 Hudson Steam Engine...

  • Page 7: Proto-Sound 2.0 Operating Instructions

    Proto-Sound 2.0 Operating Instructions This manual contains the operating instructions for Proto-Sound 2.0 in conventional mode only. Instructions for accessing DCS command mode features accompany the DCS Remote Control System equipment. Activating Proto-Sound 2.0 Conventional Mode Features Proto-Sound 2.0 features are activated by sequences of Bell a nd Horn button pushes described below.
  • Page 8 Passenger Station Announcements (PSA) Your engine is equipped with a sound package of passenger statio n announcements that you can play when you pull into a station. Each sequence described below will play as long as it is left on, randomly generating sounds, but be sure to allow approximately 30 seconds between the button pushes described below to allow the PSA sufficient time to run through each sequence.

  • Page 9: Proto-Coupler® Operation

    Tips on Using PSA •You can terminate PSA at any time by turning off power to the track for 15 seconds. •You do not have to be in Forward to use PSA. At the conclusion of the full sequence, the train will pull away from the station in whatever direction you were going when you activated the feature.

  • Page 10: Speed Control

    Front Coupler: To fire the front coupler (if your engine has one), quickly tap the Bell button once followed by four quick taps of the Horn button, allowing approximately ½ second to lapse between each quick button press. The sound of the liftbar and air line depletion will play, and the knuckle will be released.

  • Page 11: Locking Locomotive Into A Direction

    Locking Locomotive Into A Direction You can lock your engine into a direction (forward, neutral, or reverse) so that it will not change directions. To do this, put the engine into the direction you want (or into neutral to lock it into neutral), run it at a very slow crawl (as slowly as it will move without halting), and quickly but firmly tap the Horn button once followed by three quick taps of the Bell button, allowing approximately ½...

  • Page 12: Maintenance

    Maintenance Lubricating and Greasing Instructions The engine should be well oiled and greased in order to run properly. You should regularly lubricate all side rods, linkage components and DO NOT DO NOT DO NOT pickup rollers to prevent them from squeaking. Use light household OVER OIL OVER OIL OVER OIL...

  • Page 13: Cleaning The Wheels, Tires And Track

    Figure 6. Removing the Body and Lubricating the Grease Points Figure 7. Motor Gearing Grease Plate Screws Cleaning The Wheels, Tires, and Track Periodically check the locomotive wheels and pickups for dirt and buildup, which can cause poor electrical contact and traction as well as prematurely wear out the neoprene traction tires.

  • Page 14: Traction Tire Replacement Instructions

    Traction Tire Replacement Instructions 1. Remove the side rods from the wheels in order to slip the new tire over the grooved drive wheel. Make sure to note the position of all rods before removing. 2. Make sure the old tire has been completely removed from the groove in the drive wheel, using a razor blade or small flathead screwdriver to pry away any remains.

  • Page 15: Headlight Replacement Instructions

    Headlight Replacement Instructions The locomotive’s lights are controlled by a constant voltage circuit in the engine. They are easy to remove and replace when they burn out. See the diagrams and directions below for instructions on accessing and replacing the light bulbs in this locomotive.

  • Page 16: Self Charging Battery Back-Up

    Self Charging Battery Back-up The special NiCad 2.4v self-charging battery recharges continuously during train operation and should last for up to five years. The battery is a dry battery that should not leak or cause any damage to your engine. Depending upon when your engine was built, it may need to be charged right out of the box.
  • Page 17 Battery Pack Figure 10 Battery Port Figure 11. Battery Rechar ging Port RailKing 4-6-4 Hudson Steam Engine...

  • Page 18: Protosmoke Unit Operation

    ProtoSmoke® Unit Operation This Premier steam locomotive contains a self-powered smoke unit that outputs smoke through the smokestack on the roof of the engine. The smoke unit is essentially a small heating element and wick that soaks up and then heats a mineral oil-based fluid that emits a harmless smoke.
  • Page 19 If you experience poor or no smoke output when the smoke unit is on and has fluid, check the wick to see if it has become hard, blackened, and unabsorbent around theheating element. To remove the smoke unit you will first have to remove the boiler shell (by removing the body mounting screws shown in Fig.

  • Page 20: Troubleshooting Proto-Sound® 2.0 Problems

    Troubleshooting Proto-Sound® Problems Although Proto-Sound 2.0 has been designed and engineered for ease of use, you may have some questions during initial operation. The following table should answer most questions. If your problem cannot be resolved with this table, contact M.T.H. for assistance (telephone: 410-381-2580; fax: 410-423-0009; service@mth-railking.com, 7020 Columbia Gateway Drive, Columbia MD 21046-1532).
  • Page 21 Cab Chatter Remedy Sometimes the Cab Chatter Cab Chatter plays only in neutral sounds don’t play. at random intervals. Lock-out Remedy I can’t get the engine to run after I The engine is locked into the power up the transformer. It sits neutral position.
  • Page 22 Remedy Once in PSA, the engine doesn’t So that PSA effects can be as go into reverse. Proto- realistic as possible, Sound 2.0 disables the reversing unit whenever enabled. This way the engine remains still at its stop as the operator cycles through the FYS sequences.

  • Page 23: Transformer Compatibility And Wiring Chart

    Transformer Compatibility and Wiring Chart Proto-Sound 2.0 is designed to work with most standard AC transformers. The chart below lists the many compatible transformers. Note that many of the operational commands described in these instructions require a bell button, so if your transformer does not have its own bell button, you should consider adding one to get the full benefit of the system.

  • Page 24: Additional Features Accessible With The Dcs Remote Control System

    Additional Features Accessible With The DCS Remote Control System (Additional equipment required) While conventional mode operation of a Proto-Sound 2.0 engine yields wonderfully realistic sound and several train control features, command mode operation allows the user to access a world of command functions never before accessible to O Gauge railroaders.

  • Page 25: Service & Warranty Information

    Service & Warranty Information How to Get Service Under the Terms of the Limited One-Year Warranty When you suspect an item is defective, please check the operator's manual for standard operation and trouble- shooting techniques that may correct the problem. Additional information may be found on the M.T.H. Website. Should you still require service, follow the instructions below to obtain warranty service.
  • Page 26 AUTHORIZED SERVICE CENTER AUTHORIZED SERVICE CENTER AUTHORIZED SERVICE CENTER 7020 Columbia Gateway Dr. - Columbia, MD 21046 Information: 410-381-2580 Fax: 410-381-6122 www.mth-railking.com PARTICIPATING A.S.C. RETAILER LIST ALABAMA COLORADO ILLINOIS SOUTHERLAND STATION CUSTOM RAILWA Y SUPPLY BERWYN'S TOY TRAINS & HUNTSVILLE COLORADO SPRINGS MODELS 256-533-4720...
  • Page 27 HOLLY BEACH TRAIN DEPOT LOUISIANA MINNESOTA WILDWOOD AMERICA'S TRAIN YARD DON'S HOBBY CO. 609-522-2379 BATON ROUGE MANKATO 225-926-5592 507-387-1330 NEW YORK L B C MODEL TRAINS MAINE MISSOURI BUFFALO WHEELS, WINGS & THINGS SWITCH STAND 716-631-3081 LUDLOW SAINT LOUIS 207-532-6277 314-781-4458 KURT’S TRAINS &...
  • Page 28 THE FREIGHT YARD CHARLEROI SWEEPER RHODE ISLAND SMITHFIELD CENTER GRANDMA'S HOUSE 919-934-6229 CHARLEROI GRANDPA'S TRAIN 724-483-3397 WARWICK LITTLE CHOO CHOO SHOP 401-463-7803 INC. JERRY QUINN TRAINS & TOYS SPENCER COATESVILLE SOUTH CAROLINA 704-637-8717 610-383-1931 EMERALD TRAIN & HOBBY GREENWOOD TRAIN LOFT CRANBERRY HOBBY DEPOT 864-223-2247 WINSTON-SALEM...
  • Page 29 T S G HOBBIES SOMMERFELD'S TRAINS THE TRAIN ROOM WARRENTON BUTLER FERGUS 540-347-9212 262-783-7797 19-787-3280 HOBBY OUTLET NORGE STATION FOND DU LAC CREDIT VALLEY RAILWAY WILLIAMSBURG 920-924-3770 COMPANY 757-564-7623 TREETSVILLE G B T V & TRAINS 905-826-1306 WASHINGTON GREEN BAY 920-496-9697 B&H TRAINS EASTSIDE TRAINS...

Table of Contents