Kenwood DDX793 Instruction Manual page 71

CONNECTION/INSTALLATION CONNECTION/INSTALLATION
Removing the unit
(Only for DDX793/
DDX773BH/DDX593/DDX573BH/DDX393/
DDX373BT/DDX23BT)
❏ Removing the trim plate
1
Engage the catch pins on the extraction
key (4) and remove the two locks on the
lower part. Lower the frame and pull it
forward.
4
2
Remove from the upper two catches.
• The frame can be removed from the top side in
the same manner.
❏ Removing the unit
1
Remove the trim plate. (See the left
column.)
2
Insert the two extraction keys (4), then
pull them as illustrated so that the unit can
be removed.
4
• Be careful to avoid injury from the catch pins on
the extraction key.
ENGLISH 71