Declaration Of Conformity - Bosch AGS 7,2 LI Original Instructions Manual

OBJ_DOKU-33836-003.fm Page 15 Monday, December 8, 2014 8:30 AM
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the acces-
sories, keep the hands warm, organisation of work patterns.

Declaration of Conformity

Grass Shear
We declare under our sole responsibility that the product de-
scribed under "Technical data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/35/EU,
2014/30/EU, 2006/42/EC including their amendments and
complies with the following standards: EN 60335-1,
EN 50636-2-94 (battery powered product),
EN 60335-1, EN 60335-2-29 (battery charger).
Shrub Shear
We declare under our sole responsibility that the product de-
scribed under "Technical data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/35/EU,
2014/30/EU, 2006/42/EC including their amendments and
complies with the following standards:
EN 60745-1, EN 60745-2-15 (battery powered product),
EN 60335-1, EN 60335-2-29 (battery charger).
2000/14/EC: Guaranteed sound power level 77 dB(A). Con-
formity assessment procedure according to Annex V.
Equipment category: 25
Technical file (2006/42/EC, 2000/14/EC) at:
Bosch Lawn and Garden Ltd., PT-LG/ENS4,
Stowmarket, Suffolk IP14 1EY, England
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
05.12.2014
Mounting and Operation
Action
Delivery Scope
Battery Charging
Detaching Tool
Attaching Tool
Switching On and Off
Fitting Telescopic handle
Adjusting Handle Length
Setting for Edge Cutting
Maintenance
Accessories
Bosch Power Tools
Cutting Hedges
Before cutting check the hedge for foreign objects e. g. wire
fences.
Application
To maintain control hold the machine properly by the handle.
Holding the machine incorrectly could result in injury.
After use replace the blade transport guard.
Telescopic handle
The telescopic handle can be used with the grass and shrub
shear attachment. Before using the handle with the shrub
shear attachment, the wheels should be detached.
Anti Blocking
If the blade stalls on a tough material, the load of the motor in-
creases. The intelligent micro-electronics senses this over-
load condition and repeatedly reverses the motor, in order to
prevent stalling and to cut the material through.
This audible reversing cut action continues for up to 3 s.
After cutting through, the garden product continues in its nor-
mal mode, or in case the overload condition continues the
blades automatically stop in the open position (e. g. in case a
piece of metal fence accidentally blocks the garden product).
Battery Charge-control Indication
The battery charge-control indicator indicates the charging
progress. During the charging process, the indicator flashes
green. When the battery charge-control indicator lights up
green continuously, the battery is fully charged.
The battery charge-control indicator indicates the charge
condition of the battery for a few seconds when the On/Off
switch is pressed through halfway of fully.
LED
Continuous lighting, green
Flashing light, green
Flashing light, red
Continuous lighting, red
Figure Page
1 221
2 221
3 221
4 222
5 222
6 222
7 223
8 223
9 223
10 224
English | 15
Capacity
35 – 100%
15 – 35%
5 – 15%
0 – 5%
F 016 L81 215 | (8.12.14)