Intended Use - Bosch AGS 7,2 LI Original Instructions Manual

OBJ_DOKU-33836-003.fm Page 13 Monday, December 8, 2014 8:30 AM
Safety Warnings for Battery Charg-
ers
Keep the battery charger
away from rain or moisture.
Penetration of water in the bat-
tery charger increases the risk of an
electric shock.
 Do not charge other batteries. The
battery charger is suitable only for
charging Bosch lithium-ion batteries
within the listed voltage range. Other-
wise there is danger of fire and explo-
sion.

Keep the battery charger clean.
Contamination can lead to danger of
an electric shock.

Before each use, check the battery
charger, cable and plug. If damage
is detected, do not use the battery
charger. Never open the battery
charger yourself. Have repairs per-
formed only by a qualified techni-
cian and only using original spare
parts. Damaged battery chargers, ca-
bles and plugs increase the risk of an
electric shock.
 Do not operate the battery charger
on easily inflammable surfaces
(e. g., paper, textiles, etc.) or sur-
roundings. The heating of the battery
charger during the charging process
can pose a fire hazard.
 Supervise children. This will ensure
that children do not play with the
charger.
 Children or persons that owing to
their physical, sensory or mental
limitations or to their lack of expe-
rience or knowledge, are not capa-
ble of securely operating the
Bosch Power Tools
charger, may only use this charger
under supervision or after having
been instructed by a responsible
person. Otherwise, there is danger of
operating errors and injuries.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
manner.
Symbol Meaning
Wear protective gloves
Wear eye protection.
Reaction direction
Movement direction
/ Switching On/Switching Off
Permitted action
Prohibited action
Audible noise
Accessories

Intended Use

The garden product is intended for light trimming of shrubs
and lawn edges.
English | 13
F 016 L81 215 | (8.12.14)