Removing The Unit; Specifications - Sony CDX-GT440U Operating Instructions Manual

•
20
Removing the unit
1
Remove the protection collar.
o
Detach the front panel (page 7).
e
Pinch both edges of the protection collar,
then pull it out.
2
Remove the unit.
o
Insert both release keys simultaneously
until they click .
Hook facing
inwards.
e
Pull the release keys to unseat the unit.
e
Slide the unit out of the mounting.
Specifications
AUDIO POWER SPECIFICATIONS
CEA2006 Standard
Power Output: 17 Watts RMS
x
4 at
4 Ohms < 1% THD+N
SN Ratio: 82 dBA
(reference: I Watt into 4 Ohms)
Tuner section
FM
Thning range:
87.5 - 107.9 MHz
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency:
150 kHz
Usable sensitivity:
10 dBf
Selectivity:
75 dB at 400 kHz
Signal-to-noise ratio:
70 dB (mono)
Separation:
40 dB at
J
kHz
Frequency response:
20 - 15,000 Hz
AM
Tuning range:
530 - 1,710 kHz
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency:
25 kHz
Sensitivity: 26 f.I V
CD Player section
Signal.to-noise ratio:
120 dB
Frequency response:
10 - 20,000 Hz
Wow and flutter:
Below measurable limit
USB Player section
Interface:
USB (Full-speed)
Maximum current:
500mA
Power amplifier section
Output:
Speaker outputs (sure seal connectors)
Speaker impedance:
4 - 8 ohms
Maximum power output:
52 W x 4 (at 4 ohms)
General
Outputs:
Audio outputs terminal (front, sub/rear switchable)
Power antenna (aerial) relay control terminal
Power amplifier control terminal
Inputs:
Remote controller input terminal
Antenna (aerial) inpullerminal
AUX input jack (stereo mini jack)
USB signal input connector
Tone controls:
Low: ± I0 dB at 60 Hz (XPLOD)
Mid: ±10 dB at I kHz (XPLOD)
High: ±IO dB at 10 kHz (XPLOD)