Sony CDX-GT440U Operating Instructions Manual page 25

SONY
4-152-753-11(1 )
6
A
FM/AM
Compact Disc Player
-
~
Gl§
c::::=J
1
'--------<l~
-
B
Installation/Connections
Installation/Connexions
CDX-GT440U
©2009
Sony
Corporation Printed in Thailand
Connection example
[g]
Connection diagram []]
Notes
• Be sure /0 connect/he ground (earth) lead before connecting
the amplifier.
• The alarm will only sound If the bull/-in amplifier is used.
o
To a metal surface of the car
First connect the black ground (earth) lead. then connect the
yellow. and red power supply leads
e
To the power antenna (aerial) control lead or
power supply lead of antenna (aerial) booster
Notes
• It is not necessary to connect this lead if there is no power
antenna (aerial) or antenna (aerial) booster.
or
with
a
manually-operated telescopic an/enna (aerial).
• When your car has a buill-in FMlAM antenna (aerial) In
the rear/side glass, see "Notes on fhe control and power
supply leads. "
e
To AMP REMOTE IN of an optional power
amplifier
This connecfion is only lor amplifiers. Connecting
any other
system may damage the unit.
o
To the +12 V power terminal which is
energized in the accessory position of the
ignition key switch
Notes
• If lhere
is
no accessory positJOfl. connect to the
' *
12 V
power (ballery) terminal which
IS
energized at ai/tImes.
Be sure
10
connect the btadf ground (earth) lead to a
metaf surface of the car first.
• When
~r
car has
a buill-in FMlAM antenna (aerial) in
the rear/side glass, see "Notes on the control and power
supply leads. ~
" To the +12V power terminal which is
energized at all times
Be sure to connec1 the blade ground (earth) lead to a metaf
surface of the car first.
Cautions
•
Thi~
unit h designed for negativc ground (canh) 12 V
DC operation only.
• Do not gel the leads under a screw. or caught in moving
paris (e.g. seal railing).
• Before making connections.
Illm
the em ignition
on"
10
:l\'oid short cir(.~uits.
• Connect the yellow and red power input leads only
<lflcr all olher leads have been conncl.:lCd.
• Run all ground (earth) leads to a common
ground (earth) point.
• Be sure
10
insulate :.my loose unconnected IC:ld~ with
electrical tape for safely.
• Thc u"e of optical instrumcnts with this product will
incre:lse eye hazard.
Notes on the power supply lead (yellow)
• When connecting thi~ unit in comhinatiol1 with uther
stereo componCnls. the connected car circuit'" rming
must be higher than the sum of each cumponent\ fu..;c.
• When no car l:ircuits arc rated high enough. l,:onncct
the unit directly
10
the bancry.
Parts list
IT]
• Thc numbers in the list arc keyed to thu...e in the
in"tmction.....
• The bmdel
<D
and the protection collar@:lre
allachcd to the unit before ...hipping. Before mounting
the unit. usc the release keys
®
to remO\'e the hr... d.ct
<D
from the unit. For details. sec "Removing the
protection collar and the bracket
<Dr'
on the reverse
"ide of the "heel.
• Keep the release keys
®
for future use as they
are also necessary if you remove the unit from
your car.
Caution
Handle the bmcket
<D
carefully to avoid injuring your
linger...
®
x2
X4
®
®
(j)
Equipment used in illustrations (not supplied)
Appareils utilises dans les illustrations (non fournis)
o
Front speaker
Haut-parleur avant
Active subwoofer
Caisson de graves actif
Catch
Note
Before installing, make sure that the catches on both sides of
the bracket
CD
are bent inwards
2
mm (J/J2 in). If the catches are
straight or bent outwards, Ihe unit will not
be
installed securely
and may spring ouf
Rear speaker
Haut-parleur arriere
Power amplifier
Amplificateur de puissance