Display Items; Repeat And Shuffle Play; Other Functions; Changing The Sound Settings - Sony CDX-GT440U Operating Instructions Manual

• This unit cannot recognize USB devices via a USB
hub.
Display items
Other functions
Changing the sound settings
Repeat and shuffle play
1
During playback, press (]) (REP) or
CD
(SHUF) repeatedly until the
desired setting appears.
o
Source
G
Track name, Artist name, Album number*,
Album name, Track number/Elapsed playing
time, Clock
*
Album number
is
displayed only when the album
is
changed.
To change display items
G,
press
(DSPL).
Notes
• Displayed items will differ, depending on the USB
device, recorded format and settings. For details,
visit the support site.
• The maximum number of displayable data is as
follows.
- folders (albums): 128
- files (tracks) per folder: 500
• Do not leave a USB device in a parked car, as
malfunction may result.
• It may take time for playback to begin, depending on
the amount of recorded data.
• DRM (Digital Rights Management) files may not be
played.
• During playback or fast-forward/reverse of
a
VBR
(Variable Bit Rate) MP3IWMAlAAC file, elapsed
playing time may not display accurately
• Playback of the following MP3IWMAlAAC files
is
not
supported.
- lossless compression
- copyright-protected
Select
e:; TRACK
e:; ALBUM
SHUF ALBUM
SHUF DEVICE
To play
track repeatedly.
album repeatedly.
album in random order.
device in random order.
Adjusting the sound
characteristics
1
Press the select button repeatedly
until the desired item appears.
2
Rotate the control dial to adjust the
selected item.
3 Press ~ (BACK).
The setting is complete and the display
returns to normal reception/play mode.
The following items can be set (follow the page
reference for details):
EQ3
Selects an equalizer curve from 7 music types
(XPLOD, VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
LOW*1, MID*1, HI*l (page 16)
BAL (Balance)
Adjusts the sound balance between the left and
right speakers.
FAD (Fader)
Adjusts the relative level between the front and
rear speakers.
SUB*2 (Subwoofer volume)
Adjusts the subwoofer volume.
AUX*3 (AUX level)
Adjusts the volume level for each connected
auxiliary equipment:
"+
18 dB" - "0 dB" - "-8
dB."
This setting negates the need to adjust the
volume level between sources.
*
I When EQ3
is
activated.
*2 When the audio output is set to "SUB-OUT"
(page 16).
"ATT" is displayed at the lowest setting, and can be
adjusted up to 21 steps.
*3 When AUX source is activated (page 17).
•
After 3 seconds, the setting is complete.
To return to normal play mode, select
"e:;
OFF"
or "SHUF OFF. "
15