Numeric Keypad - Accom dveous/mx Manual Information

Note: See Technical Guide for more information on all system buttons.

Numeric Keypad

Use the numeric keypad to enter effect numbers, keyframe numbers, parameter
values, etc.
Accom
For complete details on entering values, see The Numeric Keypad in the Section
2: Getting Started.
A, B, C, and D – enters values into their corresponding softknob settings.
For example, to enter the value 17 in softknob A, enter 17 on the keypad,
then press A.
+/- – inverts existing softknob values or lets you enter a negative number.
PATH – toggles the available motion paths and lets you assign one to a func-
tion parameter. Also used to select individual files under Disk Menu.
ALIGN – adjusts parameter values to their nearest one-eighth of the range
for that parameter. Also used to select all files under Disk Menu.
TRIM – trims parameter values by the amount entered in numeric keypad.
CLEAR – erases the contents of the keypad buffer, the contents of the key-
frame edit dialog, or resets entire softkeys or menus to default.
Abekas Dveous/MX-Control Panel
A B
7 8
4 5
MX
1 2
+/-
0
1
Start Here
C D
Index
PATH
9
Contents
6
ALIGN
3 TRIM
.
CLEAR
1-19