System Buttons - Accom dveous/mx Manual Information

System Buttons

1-18
Section 1: Introduction to Dveous/MX
The System buttons access menus to setup the Dveous/MX inputs, outputs,
remote setups, and enables.
Accom
INPUT SETUP - controls blanking adjustments for input video as well as
Matte enables for each input.
REMOTE ENABLE - controls 232/422 protocol and setup for each of the
three remote ports.
OUTPUT SETUP - controls output timing and blanking. Also configures
SD/HD format, reference and video select to each of the six Dveous/MX
outputs.
REMOTE SETUP - sets up GPI input and output configurations.
NO XPOINT – tells the system to ignore the inputs originally programmed
for an effect and run it using the currently selected inputs.
ENG – You can adjust the menu to display in black on white (Normal) or
white on black (Inverted). To do so, press the ENG button to go to the Engi-
neering menu. Toggle the Setup function to Panel. Then adjust the Display
softknob to Normal or Inverted. You can also turn the Bkgd on or off. Also
controls First Birthday (ram reset) as well as software install parameters.
PERSONALITY - controls anamorphing, axis mode, run mode and field
dominance settings.
ACQUIRE - used in multiple control panel systems to delegate which panel
is the "master" control panel.
INPUT REMOTE
SETUP ENABLE
OUTPUT
SETUP
REMOTE
MX
MX
XPOINT
SETUP
PERSON-
ENG
ACQUIRE
Start Here
NO
Index
ALITY
Contents