Channel Select Buttons - Accom dveous/mx Manual Information

The Joystick
The joystick gives you immediate visual feedback about how a menu's settings
affect the image. By moving the stick you can instantly move or resize an
image, or see what different border color or warp values will do, for example.
Joystick control directional controls are indicated in the menu display.
Up/down arrows indicated vertical movement, left/right arrows indicated hori-
zontal movement, while a circular arrows means twist the stick.

Channel Select Buttons

The five Channel Select buttons delegate, or select, channels for transforms. You
can have more than one channel delegated at a time except, of course, in single
(1) channel HD mode where 1A is the only channel used.
The LED displays above and below the "A" Channel Select buttons read
VIDEO to indicate that these channels are video channels. The displays above
and below the "B" Channel Select buttons read either VIDEO or KEY, to let
you know how you have configured your channels in the KEY menu Setup
mode.
Frozen – One or more On-Air Freeze buttons is on. On-Air freezes override
any timeline effect freeze. The channel input stays frozen no matter what
effects you recall or run.
Dissolve – The On-Air Dissolve mode is on. Transitions are from the current
DVE setup to the first keyframe of the current effect.
Delegated – Only delegated channels move when you run an effect. This
mode is selected in the PERSONALITY menu (under Misc.) by adjusting
Run Mode.
1A and 1B – delegate the single twin channel number pair.
2A and 2B – delegate the second dual twin channel pair.
GLOBAL – delegates the Global channel, which affects every channel
equally.
Abekas Dveous/MX-Control Panel
1
Start Here
Index
Contents
1-11