Accom dveous/mx Manual Information page 15

Graphics Buttons
COPY CHANNEL – copies current attributes, specific keyframes and
entire timelines from one channel to another.
START (REW) – Moves current time to 0:00.
TO – moves current time to the start of keyframe number (designated after
the TO) in the master delegated timeline.
END (FF) – moves current time to last keyframe (end of effect).
THIS – moves current time to the beginning of the current keyframe in the
master timeline.
ALL – selects all
TRIM – allows you to maintain the relative offset of parameter values
between keyframes
ENTER – tells Dveous/MX to perform the command(s) you just pressed.
For example, to delete a keyframe, you press DELETE–ENTER. To copy
all keyframes, press COPY–ALL–ENTER.
CURSOR – displays cursors and channel identifications on the Dveous/MX
output so that you can see the center of rotation for the selected 3D space.
There are separate cursors for Source and Target space, as well as for Global
space. Each channel's cursors are a unique color for easy identification.
ORBITAL FX – accesses the OrbitalFX menu. OrbitalFX provides a method
to continuously alter selected Dveous/MX parameters. See the OrbitalFX
section for details.
JOYSTICK LOCK – dedicates, or locks, the joystick to the current menu
control. This control is handy, for example, if you want to continue using the
joystick for 3D positioning of the image while at the same time using the
softknobs in the Warp menu.
Accom
ORBITAL
CURSOR
FX
Abekas Dveous/MX-Control Panel
JOYSTICK
TM LOCK
MX
1
Start Here
Index
Contents
1-15