High-Beam Flasher; High-Beam Headlamps - Mercedes-Benz 2009 CLS-Class Operator's Manual

lamps should only be used in conjunction with
low-beam headlamps. Consult your State or
Province Motor Vehicle Regulations regard-
ing permissible lamp operation.
X
Switch on the ignition.
X
Turn the exterior lamp switch to position
or ( Y page 94).
C B
X
Switching on front fog lamps: Pull out the
exterior lamp switch to first stop.
The green indicator lamp
¥
rior lamp switch comes on.
X
Switching on rear fog lamp: Pull out the
exterior lamp switch to second stop.
The rear fog lamp, the front fog lamps and
the yellow indicator lamp
†
rior lamp switch come on.
X
Switching off front fog lamps/rear fog
lamp: Push in the exterior lamp switch to
its stop.
Locator lighting and night security illu-
mination
Locator lighting and night security illumina-
tion are described in the "Control system"
section, see "Setting locator light-
ing" ( Y page 136) and "Setting night security
illumination (Headlamps delayed shut-off fea-
ture)" ( Y page 136).
Combination switch
in the exte-
in the exte-
High beam
1

High-beam flasher

2
Controls in detail
High beam
X
Turn the exterior lamp switch to position
( Y page 94).
B
X
Switching on: Push the combination
switch in direction of arrow 1.
The high-beam headlamp indicator lamp
in the instrument cluster comes on.
A
X
Switching off: Pull the combination switch
in direction of arrow to its original posi-
2
tion.
High-beam flasher
X
Switching on: Pull the combination switch
briefly in direction of arrow 2.
Lighting
Z
97