Mercedes-Benz 2009 CLS-Class Operator's Manual page 269

Tires
Display messages
Check tires, then restart Run
Flat Indicator.
Run Flat Indi-
cator Inopera-
tive
Tire Pressure Check tires
Tire pressure is only displayed
after driving for a
few minutes.
Vehicle status messages in the multifunction display
Possible cause/consequence
There was a warning message about a loss
in the tire inflation pressure and the Run
Flat Indicator has not been restarted yet.
The Run Flat Indicator is malfunctioning.
The Run Flat Indicator indicates that the
pressure is too low in one or more tires.
Vehicles with Advanced TPMS (Canada
only): The tire inflation pressure is being
checked.
Possible solution
X
Make sure the correct tire inflation pressure is
set for each tire.
X
Then restart the Run Flat Indicator
( Y page 213).
X
Have the Run Flat Indicator checked at an
authorized Mercedes-Benz Center.
X
Carefully bring the vehicle to a halt, avoiding
abrupt steering and braking maneuvers.
Observe the traffic situation around you.
X
Check and adjust tire inflation pressure as
required ( Y page 212).
X
If necessary, change the wheel (
X
Restart the Run Flat Indicator after adjusting
the tire inflation pressure values
( Y page 213).
X
Drive the vehicle for a few minutes.
Practical hints
Y page 314).
Z
267