Mercedes-Benz 2009 CLS-Class Operator's Manual page 313

X
Place bulb socket back into the housing
6
and turn it clockwise until it engages.
X
Align housing cover and turn it clock-
1
wise until it engages.
High-beam and high-beam flasher bulb
(halogen headlamps)/high-beam
flasher bulb (Bi-Xenon headlamps)
X
Turn housing cover counterclockwise
2
and remove it.
X
Turn bulb socket with the bulb counter-
4
clockwise and remove it.
X
Pull the bulb out of bulb socket 4.
X
Press the new bulb gently into bulb socket
4.
X
Place bulb socket back into the housing
4
and turn it clockwise until it engages.
X
Align housing cover and turn it clock-
2
wise until it engages.
Front turn signal lamp bulb
X
Turn bulb socket with the bulb counter-
3
clockwise and remove it.
X
Press gently onto the bulb and turn it coun-
terclockwise out of bulb socket 3.
X
Press the new bulb gently into bulb socket
and turn clockwise until it engages.
3
X
Place bulb socket back into the housing
3
and turn it clockwise until it engages.
Parking and standing lamp bulb
Halogen headlamps
X
Turn housing cover counterclockwise
2
and remove it.
X
Pull out bulb socket with the bulb.
5
X
Pull the bulb out of bulb socket 5.
X
Press the new bulb gently into bulb socket
5.
X
Press bulb socket back into the lamp.
5
X
Align housing cover and turn it clock-
2
wise.
Bi-Xenon headlamps
In vehicles with Bi-Xenon headlamps, the
bulbs of the parking and standing lamps are
LEDs.
! Do not replace the LEDs yourself. You
could otherwise damage the LEDs or parts
of the vehicle. Only have the LEDs replaced
at an authorized Mercedes-Benz Center.
Practical hints
Replacing bulbs
Replacing bulbs for rear lamps
Tail lamp unit
The tail lamps are equipped with HiP bulbs
and LEDs. Have them replaced at an author-
ized Mercedes-Benz Center.
G Observe Safety notes, see
page 308.
License plate lamps
Screws
1
Lamp cover
2
X
Switch off the ignition.
X
Turn the exterior lamp switch to position
M.
Z
311