Synchronizing - Mercedes-Benz 2009 CLS-Class Operator's Manual

Controls in detail
Power windows
i After switching off the ignition or remov-
ing the SmartKey from the starter switch,
you can operate the door windows until you
open the driver's or front passenger door.
If no door was opened you can operate the
door windows for up to 5 minutes.
Left front door window
1
Right front door window
2
Right rear door window
3
Left rear door window
4
X
Switch on the ignition.
X
Opening/Closing: Press or pull and hold
switch to to the resistance point.
1 4
The corresponding door window will move
downwards or upwards until you release
the switch.
104
X
Express operation: Press or pull switch
to past the resistance point and
1 4
release.
The corresponding door window opens or
closes completely.
X
Stopping during Express operation:
Press or pull the respective switch again.
Closing when a door window is blocked
G Warning!
Make sure that nobody can become trap-
ped and be seriously or even fatally injured
when closing a door window with greater
force or without automatic reversal func-
tion.
If the upward movement of a door window is
blocked during the closing procedure, the
door window will stop and open slightly. How-
ever, the door window will exert greater force
before reversing than when the door window
is closed in express operation. Please exer-
cise caution!
X
Immediately after the door window has
stopped because it was blocked, pull the
respective switch upwards until the door
window is fully closed.
If the door window is blocked again and opens
slightly:
X
Immediately after the door window was
blocked, pull the respective switch
upwards until the door window is fully
closed.
G Warning!
Pressing and holding the switch to close the
door window immediately after it had been
blocked two times will cause the door win-
dow to close without any reversal function
for as long as you hold the switch.
Synchronizing door windows
The door windows must be synchronized after
the battery has been disconnected or if the
door windows cannot be fully closed (Express
operation).
Each door window must be synchronized sep-
arately.
X
Close all doors.
X
Switch on the ignition.
X
Pull and hold switch 1, 2,
( Y page 103) until the respective door win-
dow is closed.
The door window opens again slightly.
or
3 4